Half round gutters rolling forming machine
Half round gutters get their name because of their shape. There are
2 types of half-round gutters:
European Bead / Traditional Single Bead – This was the standard,
and is the old fashioned way to make gutters. The front bead curls
out (a manual process), while the back of the gutter features an
open hem. This gutter is commonly sold in copper or zinc.
Double Bead Half Round Gutters – The old fashioned way to make half
round gutters, with the curled bead in the front and back side of
the gutter. Manufacturing can be done in up to 19.5′ lengths. This
gutter can be secured / installed via double bead hangers with
rods.
Reverse Bead Gutter – The new industry standard. Reverse single
bead gutters allow for more economical materials, such as aluminum
or steel to be used. This is due to the front bead curling in, and
not revealing the other side of the metal, which is normally not
finished. Here are some drawing profiles for your reference. Also
for installation easily and overlapping easily, here are also some
designs:
Note: all above sizes we made by one machine by fasting changing type.
For the gutter machine the most important is that confirm the
material, as the material is different and then the machine design
will be different.
This is the traditional half round gutter, when do the overlapping,
it has some problems. Now we have some new ideas like this:
Half round gutters rolling forming machine:
Half round gutters rolling forming machine design ideas:
1. About the accuracy control:
1) The shortest cut length is 100mm, and the longest cut length is
6000mm
2) Length error range: -0/+1 mm
3) Straightness deviation of water tank: 1mm/1m
4) Sink width error: ± 1 mm
5) Small bending width: 0.1mm/1m
2.About the machine working flow:
The equipment consists of the following parts: a 3-ton mechanical
discharge rack, a guide device, a punching device, a forming
system, a cutting (closing) system, a support device, a hydraulic
system, and an electrical control system.
3.About the detail parameters of Half round gutters rolling forming machine
Plate specification and material: color steel coil; Strength:
235Mpa; Thickness: 0.3-0.7mm; Width: mm
Forming speed: 0-25m/min Adjustable
Power requirement: Main motor power: 7.5 KW (gear reducer)
Hydraulic motor power: 4KW (with air cooling)
Host structure wall panel (blackened surface treatment, bolted
frame connection) chain (single row 1-inch chain) structure, H350
steel base frame, with 200mm foot height
Cutting method: stop cutting
18 to 20 forming passes,
Control system Yaskawa frequency converter, Siemens PLC, Siemens
touch screen (cantilever) (control cabinet is a separate type of
machine tool that only displays English and Chinese)
Cutting method: fixed length cutting after forming
Power supply requirement 380V/50Hz/3Phase
Safety protection chains, gears, and other transmission parts are
enclosed in a 1.0-mm thick box plate shape as a whole
Half round gutters rolling forming machine working videos for your reference:
