Cable tray and cover profile rolling forming machine
A cable tray system is used to support insulated electrical cables
used for power distribution, control, and communication.Cable trays
are mechanical support systems that provide a rigid structural
system for electrical cables, raceways, and insulated conductors
used for electric power distribution, control, signal
instrumentation, and communication. Metal cable trays are made of
galvanized steel, stainless steel, and aluminum. There are many
sizes, here I will take the small size from 50 to 400mm for example
to show you how the machine is designed. Here is the drawing
profile for your reference:
Cable tray and cover Machine for your reference:
Cable tray and cover Machine Working Flow for reference:
This is for cable tray rolling forming machine
This is for the cable cover profile rolling forming machine.
Now I will take the cable tray machine for example to show you how
the machine is designed:
Coil thickness : 0.8-1.5mm
Coil width: 60-420 mm
Suitable Raw Materials: Galvanized steel coil
Yield Strength: ≤235Mpa
Length tolerance: ± 1mm for 3000mm
Line Speed: 8-16 m/min
1 3Ton Hydraulic decoiler set 1
2 Leveling/cutting/punching unit set 1
3 Main roll forming machine set 1
4 Hydraulic station set 1
5 Conveyor Belt system set 1
6 Run out table set 1
Cable tray machine features:
1. The decoiler is optional, you can either choose manual decoiler
or hydraulic decoiler.
2. For the guiding system adjustable for different width of coil.
3. For the punching part, mold also adjustable for different width.
Each time 2 rows punching. If you want to get more higher speed,
you can use more punching mold.
4. After punching and then come to the before shearing and convey
table. It can solve problem of changing cutter for different sizes.
5. For the main rolling forming machine, the shaft is longer and
then frame along the shaft for different sizes.
At the back of the punching needles are adjustable easily.
As this is the small sizes of cable tray machine, bottom width from
50 to 400mm, if you like to use bigger one, we can also make for
you. As to the cover machine, width is also adjustable.
For the different sizes, you do not need to change the cutter blade
also even if it is after shearing. Here are more videos for your
reference:
